Handmade Sink Manufacturers Share 5 Details Of The Manual Sink

In life, even the common hand-made sinks have advantages and disadvantages, but many people don’t know very well. They think that the hand-made sinks are all good. So today, handmade sink manufacturers will share five methods to judge the advantages and disadvantages of manual sinks.

1. Solder tight and no solder joints. Welding quality is one of the most critical factors affecting the life of the water tank. It is well welded to prevent raw embroidery and desoldering. This is in terms of double slots.

2, the general sink needs to have an overflow device, the surface looks fine texture, the good sink will have a more beautiful pattern as the design of the overflow hole.

3, environmental sanitation, easy to clean, good flatness. The most intuitive criteria for determining quality and grade are: gloss, oil and no smudge after washing in the basin. Material anti-fouling is a priority when purchasing a sink.

4. The water pipe is leakproof, the precision of the fittings and the precision of the water tank are the same. PVC material is used, and the life of the water tank is the same as that of the water tank.

5. The thickness of the general manual sink is 1.0~1.5mm, and the quality of 1.2mm is relatively good.

information about handmade sink manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/

Leave a Reply

Your email address will not be published. Required fields are marked *