Handmade Sink Manufacturers Introduce Stainless Steel Sinks With Oil And Stain Resistance


Stainless steel sinks are popular with consumers. Stainless steel itself has the characteristics of oil removal and anti-fouling. And because its hardness is not very high, it has good processability. The shape of the stainless steel sink is diversified. Therefore, the proportion of stainless steel sinks is high in the sink market. The following handmade sink manufacturers will introduce the characteristics of stainless steel sinks.

1. Light and oily and stain resistant.
The weight of the stainless steel sink is determined by the thickness of the material. The stretching sink is thinner, so it’s much lighter. The manual sink is heavy, which is also relative to the stretching tank. Therefore, when installing, as long as there is no structural restriction, the stage is free to install in the stage, and there is no need to worry too much about the bearing.

A high-end hand-made sink, the brushed texture of the surface must be even and delicate, feels lubricated by hand, and has no rough feel. As you can see from the above picture, you can see that the brushed texture of the sink is generally evenly distributed from left to right. This will facilitate the smooth flow of oil and will not hang oil. The four inner corners of the sink are R10 rounded, which determines that the sink will not hide dirt.

2. Easy to wipe flowers, scratch characteristics.
Stainless steel sinks are easy to get flowers, which is a common problem with stainless steel products. Of course, other materials have the same problem, but the market share of stainless steel products is relatively high, so the problem response is relatively more.

Those who have used stainless steel countertops must be clear that stainless steel is a material that is easily smeared or scratched. Something that is slightly focused on the stainless steel table is dragged over and dragged over. It may take a slight amount, and there may be scratches in serious cases. Therefore, the kitchen must use a better stainless steel manual sink.

3. The problem of rusting stainless steel products.
No one can guarantee that: “Stainless steel sink will not rust!” Because everyone’s habits and living environment are different. Stainless steel, as a material that is not easy to rust, is also limited by many factors. For example: The coastal area is humid and the salt content is relatively large, which is easy to corrode stainless steel. Another example is the frequent exposure to corrosive liquids such as salt water, acid water, etc., and the reason why the stainless steel water tank itself is corroded and then rusted.

This kind of we call floating rust. That is, the debris on the surface of the sink is rusted and adhered to the surface of the sink, which is not easy to wipe off. So the best way is to cover the sink with a shovel and prevent it from falling. As for the problem of floating rust, the treatment method is also very simple, and can be removed by pushing the scouring pad mentioned above. In fact, some floating rust, watermark, scratching and so on, a scouring pad can be removed. However, note here that when handling with scouring pad, be sure to pay attention to the texture of the sink.